KEY BENEFITS

• Exceptionally strong!
  Holds up to 80% more load than other reported self-drill anchors.

• Accepts a wide range of screw sizes!
  Use 3.5, 4.0, 4.5 AND 5.0mm screws! (#6, #8, #10).

• Built-in positive stop!
  Prevents overdriving the anchor when using a cordless drill.

• Once it ‘POP’s, you know its locked!
  Activates with an audible sound to feedback correct installation.

• Remove the screw, without the anchor!
  Then re-install later, in the same anchor, with the same screw.

• Resist vibration and shock!
  The anchors thread locks into the wall and does NOT pull loose.

All tests indicate the ultimate working load (UWL). Industry safety standards recommend ¼ of UWL.
All tests were originally measured in pounds and were carried out using equivalent UNC thread anchors and bolts.

The TOGGLER SnapSkru® is a self-drilling plasterboard anchor with a difference.The built-in positive stop head resists over-drilling, stopping the anchor flush with the face of the plasterboard, it accepts an unbelievably wide range of screws up to 5.0mm, and once installed, it opens with an audible “pop” to confirm that the anchor has positively locked to the rear side of the wall, resisting vibration and shock, and providing as much as 80% greater holding power than comparable fixings with an ultimate working load of 36kg* (UWL) in 12.5mm Plasterboard! What’s more, with the SnapSkru® anchor it is possible for the screw to be removed, without removing the anchor or damaging the wall and then it can even re-applied into the same fixing!

Now that’s no ordinary self-drilling anchor.